here's How to Update Bios

Onepointnet

Important how we update the bios on our computer, many people are less aware than other software systems also need to update the bios to update the following:
1. Create a Bootable USB Disk advance

    Install the HP USB Format Utility
    Run the software HP USB Format Utility
    Download Ms Dos File System
    Extract the file and put in place anywhere
    Run the software HP USB Format Utility
    Format your USB and tick the "Create a DOS startup disk" and check "using DOS System Files located at" and point the msdos file system files contained in the folder where you store
    Konfiguras padai HP USB Format tool to make USB Bootable Disk with DOS
    Click Start when ready. Wait until the process is complete
    Copy File updatean bios reply form. Zipped into flash
    Extract the files. Zip up the contents of the file is outside (not inside a folder)
    Write down / memorized berextensi file name. "BAT", because it needed to be typed in DOS mode
    USB ready to be used for booting.

2. Set Boot from USB flash

    Plug your USB stick boot who has prepared before the computer is turned on
    Log into Bios by pressing "DEL" when the new computer is switched on
    Go to the menu "Advanced BIOS Feature"
    Select "Hard drive boot priority", then make your flash boot priority no. 1 with the '+' or '-' pd keyboard
    Save the BIOS configuration is with pressing the 'F10', then press 'Y' (Yes), then enter
    The computer will restart, and allow it to go into DOS Operating System

3. Update Bios

    Once you get into DOS (command prompt such as A: \>), type the file name. "BAT" was. eg: "HA0307.BAT" and press enter
    AWARD Bios Flasher will appear, press enter when asked to confirm the name of the bios file that will be executed.
    Wait until the update process is complete (about 5 minutes)
    After the update is complete, you will be prompted for confirmation to restart by pressing Enter
    PC will restart and your PC is ready to use with the new bios. Do not forget to return to the hard drive Boot Device
Good luck!